Kodak Photo Tex Repositionable Fabric - Aqueous
KODAK Aqueous Photo Tex Repositionable Fabric sticks to any non-porous fl at surface and removes easily with no residue for sharp looking, seamless graphics and superior photographic images every time. KODAK Aqueous Photo Tex Repositionable Fabric is ideal for life-size photographic cut-outs for walls and wall murals. It also works great for a variety of indoor and outdoor applications, including windows, backlits, doors, sign boards, and other flat surfaces. The adhesive is removable, reusable, and repositionable. It does not remove paint from a primed wall, is safe to apply over wallpaper, applies without wrinkles, and does not rip. This version of KODAK Aqueous Photo Tex Repositionable Fabric is compatible with both piezo and thermal printhead technologies.
| Properties | Specifications |
|---|---|
| Material | 40-45% polyester, 40-45% pulp-cellulose |
| Gauge | 10 mil (557kg/m): Base 6 mil, liner 4 mil |
| Weight | 240 gsm |
| Printer/Ink Compatibility | Canon, Epson, Encad, Hewlett-Packard, Mutoh, Mimaki, and Roland with pigment-based inks. |
| Software Setting | Optimized printer settings will vary from printer manufacturers. A fine art paper or matte paper setting is an appropriate starting point. However, we recommend that you try different settings to achieve optimum performance for your specific application. |
| Color Matching | For the best and most consistent results, a profile should be created using an external color calibrator in conjunction with your RIP and color matching software. |
| Finishing/Post Processing | Use a carbide knife for kiss and die cutting. For additional protection, liquid or spray coatings are recommended. Recommended outdoors for up to six months without additional protection. |
| Lightfastness | The fading time of inkjet ink is a direct result of the inks you choose and the environment where the print is displayed. Contact the ink manufacturer to determine suitability for a particular application. |
| Optimal Service Environment | For printing: 59-77° F, 20-80% Relative Humidity For end use: 0 to 176° F |
| Handling Recommendations | Due to the absorptive nature of the coating, you should avoid touching the coated surface of the film. To install the graphic, peel 4 inches of the liner off the graphic and place on wall. Continue to peel back 4 inches of the liner incrementally while mounting. |
| Ideal Storage Conditions | 50-80° F, 35-65% R.H. A controlled environment is recommended. Store in original packaging. |
| Shelf Life | Greater than 1 year from the BMG ship date when stored in proper conditions. |